-40%
0.1-200MHz DC bias isolator medium wave, short wave and ultra short wave
$ 17.55
- Description
- Size Guide
Description
0.1-200MHz DC bias isolator medium wave, short wave and ultra short wave1、 Purpose
1. RF power supply of active antenna
2. Output isolation of broadband amplifier
3. Communication data is injected through RF terminal
2、 Working parameters
1. Frequency range: 100k-200mhz
2. Insertion loss: 0 05dB@1MHz Zero 08dB@100MHz (refer to the measured S11 and S21 parameters for details) check the standing wave ratio and transmission parameters
3. Maximum voltage: 50V
4. Maximum current: 1000mA
The default is the male and female connector. Please remember to contact the customer
6. System impedance: 50 ohm
7. Overall dimension of length, width and height: 45mm * 30MM * 27mm (excluding n-type joint)
92mm * 30MM * 27mm (including n-type joint)
3、 Wiring mode
1. DC: external DC power supply
2. RF: RF signal terminal (this port can only transmit RF signal)
3. RF + DC: RF DC bias (this port can transmit RF and DC bias)
4. GND shrapnel: common ground terminal of DC power supply
5. VCC core capacitance: the power supply terminal of DC power supply
4、 Product pictures