12 v lead-acid battery LCD power display panel battery tester

Description

12 v lead-acid battery LCD power display panel battery tester
Features:
1. Voltage accuracy good consistency;
2. Lower power consumption, can sleep (only 10 ua, power consumption can be triggered by key wake up).
3. Automatic trigger function, automatically displayed when charging or discharging;
The basic method of use: two wires attached plus or minus red black line connected battery.
Directions for use
12 v lead-acid
battery LCD power display panel battery tester
Features:
1. Voltage accuracy good consistency;
2. Lower power consumption, can sleep (only 10 ua, power consumption can be triggered by key wake up).
3. Automatic trigger function, automatically displayed when charging or discharging;
The basic method of use: two wires attached plus or minus red black line connected battery.
Directions for use
A key operation:
Positive buttons for the OK button to lit backlight or sleep wake up. The different keys height.
Power module on the back of the two white buttons for kups write and Kdn left is used to select parameters.
Selection: 2.
Power battery plate, hold Kdn button, to the electric power board, Kdn release button, and the right side of the display symbols in English: "Pbx" or "Lix" x to battery string of number, press kups or Kdn choice model in the following order:
Pb1: Pb12V lead-acid batteries
Pb2: Pb24V lead-acid batteries
Pb3: Pb36V lead-acid batteries
Pb4: Pb48V lead-acid batteries
Li2:2 series of lithium-ion battery pack
Li3:3 series of lithium-ion battery pack
Li4:4 series of lithium-ion battery pack
Li5:5 series of lithium-ion battery pack
Find models can be shut down power energizing after normal use.
Need the following function model, please use below set (set improvement model, without soldering pen, through the button can choose)
F1: backlight delay shutdown functions: power show after 10 seconds into the state of low power consumption (100 ua), the liquid crystal display, but the backlight to shut down. Press OK button on the back light for 10 seconds.
F2: dormancy function: power show after 10 seconds into the ultra low power (< 15 ua) state, the LCD and the backlight are closed, after press OK key again according to 10 seconds.
F3: backlight voltage trigger function; Power show after 10 seconds into the state of low power consumption (100 ua), the liquid crystal display, but the backlight to shut down. Backlit lights up automatically when the voltage change of 10 seconds, or press OK button on the back light for 10 seconds.
F4: electricity self-inspection: every time to power on LCD strokes in turn display for 2 seconds, and then choose the display of model 1 second, the final amount in normal display.
F5: display voltage: only on the right shows the current voltage, and the left side of the battery symbol is normal display according to the selected model.
F6:The lower left corner Logo liquid crystal display.
Shipment quantity: 1pcs