13.56M RFID Module Card Reader/Writer With Antenna Watchdog + USB to TTL

Description

13.56M RFID Module Card Reader/Writer With Antenna Watchdog + USB to TTL
Product Description
CY-14443A series of embedded RFID reader module based on the ISO14443 standard non-contact card
reader chip using 0.6 micron CMOS EEPROM process, support the ISO14443 typeA agreement in support
of the MIFARE standard encryption algorithm. Inside the chip highly integrated analog modulation and
demodulation circuit, just the least amount of peripheral circuits can support the UART interface (-C),
the I2C interface (-U). Particularly suitable for the application of the ISO14443 standards, water,
electricity, gas meters, vending machines, access control, elevators, drinking fountains,telephones and
other billing systems or the identification system reader.Users do not have control of the RF base station,
simply through the selected UART, IIC or SPI interface to send commands to the card to complete the
operation.CY -14443A embedded module supports Mifare One S50, S70, Ultra Light & Mifare Pro,
automatically searching cardCY-14443A embedded module is low power consumption wide voltage
function modules, working 2.7 to 3.6V, the normal work of the average current <5mA 3.3V user IO reset
module power consumption in ua level integration module can greatly reduce the PCB areaenhanced
application performance, capable of a variety of applications1. CY-14443A embedded series of
modules to adapt to the handheld device to use, with an external antenna:The module is small,
engage integration, power consumption, external antenna can be flexibly configured according to the
user mold and specific applications, it is recommended FPC antenna fit mold. Module size is only the
District 14x24mm stamps mouth process, for the standard accessories as a handheld interrogator
equipment, mobile patrol 2. An increase 4kBits EEPROM, the EEPROM byte address from 0x00 to
0x1FF 3. You can read the PCD, PN, SN 4. Size:5.8 *3.5cm Feature: 1. UART serial interface
2. Automatically senses the cards close to the antenna area, and generate an interrupt signal
3. Highly integrated ISO14443A reader chips, support for MIFARE standard encryption algorithm
4. Both with TTL / CMOS voltage mode of operation, the operating voltage 3 to 5.5V
5. Industrial-grade high-performance processor, built-in hardware watchdog, with high reliability
6.Anti-jamming processing and excellent EMC performance
7. simplify the complexities underlying card operating as several simple commands
8. Antenna integration module(comes with the antenna, reading distance 0-6cm)
Package:
1pc High Frequency RFID Module + 1pc USB to TTL module