2020 DIY KIT R2017 Aviation Band Receiver Aeronautical Band Receiver Kit

Description

2020 DIY KIT R2017 Aviation Band Receiver Aeronautical Band Receiver Kit
Description
Function:
This is a kit, you need to solder it yourself.
This kit is dedicated to receiving calls between airplanes and towers. With a good antenna (VHF section Yagi antenna), it can receive calls between various types of airplanes and towers up to about 190Km in an open area. The universal interface is convenient for hobbyists to equip the shell, as long as the shell is larger than this board can be used.
This suite is dedicated to receive calls between aircraft and tower, cooperate with the good performance of the antenna (VHF yagi antenna), open withi
Main indicators
Power supply: 9-12 v
Antenna: 50 ohms, is not balanced
Typical receiving current: 30 ma
Receive frequency: 118 MHZ to 136 MHZ
Working pattern: AM
Circuit principle
Antenna to receive signals first enter a bandpass filter, bandpass filter function is to ensure that the 118 MHZ to 136 MHZ signal can be put into CD7358 high, other signal is maximum attenuation. CD7358 internal have a voltage-controlled oscillator at the same time, the frequency changes in D2 junction capacitance, design covers about 120 MHZ to 150 MHZ.
Native intermediate frequency is 10.7 MHz, after CD7358 mixing signal to 10.7 MHz ceramic filter, its function is to filter out irrelevant signals generated by mixing, and then gave CD7613 further intermediate frequency signal and amplification, detection, and the low, and then sent the headphone output.
Among them, the AGC function performed by CD7613.
Component selection
All less than 1000 pf the capacitors for high frequency of ceramics, greater than 1 uf capacitance for aluminum electrolytic capacitors, all resistance is a quarter w 5% fixed resistance.
Production debugging
Before you install all components all the transistor, resistor, capacitor with a multimeter test again. And then control circuit diagram and the identity of the PCB mounting of all components. General compliance installation sequence of low to high. To install socket in integrated circuit at the same time, this can effectively avoid the core of integrated circuit welding bad. Checked everything is in order, after turn on the juice and the socket insert the headset, put the W2 turn clockwise to the end, should be able to hear white noise . For antenna connected to a soft line of 60 centimeters, can hear the noise significantly larger or hear FM radio, radio frequency (rf) channel basic no problem.
package：1x
2020 DIY KIT R2017 Aviation Band Receiver Aeronautical Band Receiver Kit
If you have any questions, please contact us in time, we will help you deal with the problem for the first time.
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 15 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours(working day) for us to response. Thank you.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact.