-40%
35dB 1MHz-700Mhz 433Mhz 3.2W VHF UHF HF FM RF Power Amplifier amp Radio Ham
35dB 1MHz-700Mhz 433Mhz 3.2W VHF UHF HF FM RF Power Amplifier amp Radio Ham
35dB 1MHz-700Mhz 433Mhz 3.2W VHF UHF HF FM RF Power Amplifier amp Radio Ham
35dB 1MHz-700Mhz 433Mhz 3.2W VHF UHF HF FM RF Power Amplifier amp Radio Ham

35dB 1MHz-700Mhz 433Mhz 3.2W VHF UHF HF FM RF Power Amplifier amp Radio Ham

$ 11.61

Availability: 89 in stock
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: China
  • Item must be returned within: 30 Days
  • Type: Power Amplifier
  • Refund will be given as: Money Back
  • Band: AM
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Model: Power Amplifier
  • Brand: Unbranded/Generic

    Description

    Description:
    Broadband RF power amplification, suitable for various radio applications, short-wave FM remote control toys, radio walkie-talkies, digital radio stations, etc., input 1 milliwatt (0DBM) can output a maximum of 3 watts, 15V voltage power supply, broadband operation can be 1MHZ to 700MHZ. Due to the sophisticated design, it can reach 35DBM (3W) at the low frequency end, and the output power can reach 32DBM (1.6W) at 500M. Please refer to the S21 parameters and point frequency test chart for details. Amplifier size 37MM * 56CM * 1.5CM (with large heat sink on the back).
    Performance parameter:
    1. Supply voltage: + 15V DC (typical current value 450mA / maximum gain output)
    2. Working frequency: 1MHZ-700MHZ, input and output impedance: 50 ohms;
    3. Maximum output amplitude: 35dbm (3.2W / 50 ohm)
    4. Gain: 35 dB (see S21 curve for specific curve, different frequency points are different)
    5. Input signal size: low frequency band (0DBM / 1mW), high frequency band (2DBM)
    Note:
    The input signal should not exceed 1 mW, otherwise the board can not work normally.
    Shipping list:
    1pcs 35dB 1MHz-700Mhz 433Mhz 3.2W VHF UHF HF FM RF Power Amplifier amp  Radio Ham