AVRT5 APRS Tracker VHF Support APRSdroid with GPS Bluetooth Thermometer TF Card

Description

AVRT5 APRS Tracker VHF Support APRSdroid with GPS Bluetooth Thermometer TF Card
Description
Hardware integration: GPS module, antenna, MCU MCU, VHF transceiver module, built-in battery, charging IC, temperature sensor, TF card, buzzer, wireless Bluetooth module
1. GPS module ublox module, high sensitivity, fast positioning, stable, power saving.
2. GPS antenna
18mmX18mm active GPS antenna, built-in LNA amplification, search star, fast positioning.
AVR microcontroller
AVR atmega64 microcontroller, stable and reliable.
4. VHF module (1W)
The latest 1W VHF transceiver module small size, high stability for all types of wireless data transmission.
5. VHF antenna
The VHF antenna is shipped separately and matched to ensure launch standing and launch efficiency.
6. 2200mA battery
High-quality lithium batteries, the IMAX B6 0.6A charge and discharge, are in the 2200--2400mA or so. Boot 20 seconds interval continuous launch of about 18-24 hours of work. If the small power or extend the launch interval can work more than 72 hours.
7. Built-in charge management IC (input 5V)
Built-in lithium battery management IC, to avoid battery overshoot and over discharge, intimate protection of the battery, the use of worry-free. Charging current <500mA, working voltage is lower than 3.4V, automatic low power protection shutdown.
8. LED status display (charge and send and receive LCD)
Dual LED display, red is charging instructions, charging red, full extinguished or darken. Green is GPS indication: Blinking means not positioning, always on means positioning.
9. Single button (switch and manual launch)
Long press the button boot, short press after boot - launch, long press - shutdown. Accompanied by beep prompts.
10. Temperature 18B20 sensor (-40C ~ + 99C)
Temperature sensor, IC accuracy of 0.0625 degrees, real-time transmission board and the temperature inside the machine. (Need to measure the external temperature can be self-derived)
11, buzzer (beep)
Switch on and launch, a beep prompts to facilitate the state to determine the work and blind transfer machine.
12, TF deck (record coordinates)
Supports the following 4G TF card, supports FAT16 FAT32 partition format, in accordance with the time named file name automatically saved as KML format. For example, at 18:20 on December 10, 2013 began positioning. File name: 12101020.KML (month, day, Greenwich Mean Time)
13, wireless 2.0 Bluetooth module (connected to the phone)
Built-in Bluetooth module, the rate of 9600bps, one can output aprs decoding signal in real time. Second, you can connect Andrews phone input KISS signal, control the launch of T5. Specific functions see aprsdroid. Third, you can use the Android phone serial commands to configure the call sign and set the VHF module frequency.
For example: Set call sign: AT + CALL = BG6QBV7
Set the frequency: AT + FREQ = 144.6400
Set buzzer AT + BEEP = 1 ON AT + BEEP = 0 OFF
Product main functions and parameters will not go into details, in short, integrates the functions of previous generations.
The current sample machine make improvisation to see, antenna holder for a pile of tin reinforcement.
Renderings part (single button + double LED)
Built-in GPS antenna, the real one machine.
Configuration method:
Note: If your computer prompts MSComm32.ocx problems, their own Baidu (do not let the link here)
1. Installed USB cable driver;
2. AVRT5 shutdown;
3. Open configuration soft add, click read configuration (Read Config);
T5 immediately boot (re-power and let go);
5. After modification, you can write (Write Config).
Upgrade software method:
Write upgrade ROM to device Brush Method:
1. Download Brush software, set the software serial number, speed is 19200bps do not move.
2. Load the HEX Upgrade ROM to be upgraded
3. Click "Download" in the "Operation" menu of the upgrade software
4. When you see the password connection, immediately press and hold the power button until the upgrade process is completed.
5. If the upgrade fails, the machine does not turn on normally or the green LED blinks, repeat the above steps.
6. If you choose the wrong ROM upgrade, the machine has blinking and can not be shut down, please re-open the machine battery, upgrade successfully restored.
Package Contents :
1 x SainSonic A510 APRS tracker
1 x USB data cable to PC
1 x VHF Antenna
Payment
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Returns policy
1.If the item is not as described or damaged in transportation, please send it back within 7 days upon date of receipt
2.For defective item, we guarantee free exchange or full refund within 30 days from the day of placing order
3.Buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements
4.Items must be unused, in original packaging and include all parts, accessories and packaging
5.When we receive your returned item, we will investigate the situation and consider to offer replacement or refund according to the situation
Terms of sales
1. All the items will be tested before shipping. Buy them with the confidence!
2. We maintain hightest buyer ratings StarStarStarStarStar and 100% customer satisfaction,  Positive Feedback will be much appreciated from you.
3. Any dissatisfaction or problem, please contact us before you leave neutral Neutral feedback rating or negative Negative feedback rating feedback.
Feedback
1.When you received package and like it, kindly comfirm received order and leave a positive feedback with full stars for us. Thank you.
2.Any dissatisfaction or problem, please contact us before you leave neutral Neutral feedback rating or negative Negative feedback rating feedback.