Farmall 12V Alternator Conversion Kit A, C, Super A, Super C, 100, 130, 200

Description

12V Alternator Conversion kit: 1 Wire Alternator w/ 5/8" pulley, Alternator Mounting Bracket & 12V Internal Resisted Coil
IH Farmall Tractor:
A, AV, B, BN, C, Super A, Super C, 100, 130, 200, 230
Models without Cultivators.
Power Unit:
U123, U2, U2A
This kit does not fit Farmall 140 Tractor
If your Tractor / Unit has the 1/2" belt, you must either use your 1/2" pulley from your Generator, or purchase the 5/8" belt to use w/ the 5/8" pulley on the Alternator.
The 12 Volt Alternator is used to convert the 6 Volt system to a 12 Volt system.  This alternator has a simple 1 wire hook up. All you will have to do is run a wire from the alternator through ammeter to the positive side of the battery. The alternator has built in regulator. You must rev the engine to 800 - 850 RPM in order for the unit to self excite.  This alternator is meant for 12 volt negative ground system.  The alternator must be grounded to the bracket.  Some of the paint/powder coat must be removed where the alternator bolts to the bracket for sold ground connection. The housing is 6 1/4" diameter with the pully diameter being 2 1/2" and fits 5/8" belt.
The 12 Volt distributor coil is a barrel style coil and is internally resisted.  It includes the coil mounting bracket. The primary ohms resistance is 3.1 and the secondary ohms resistance is 9.6.
Brand names, logos and original equipment part numbers are used for identification purposes only and remain the trademark of their respective owners. Parts listed are "made for", "compatible with" and/or "fit" the respective makes and models listed if applicable.