NTC thermistor to voltage 100k NTC to 0-5V 0-10V linear conversion temperature

Description

NTC thermistor to voltage 100k NTC to 0-5V 0-10V linear conversion temperature
This is a linear conversion module, which converts the input NTC resistance signal into temperature (voltage signal) output by internal chip processing.
There are two kinds of output voltage range selection.
Module parameters
1. Working voltage: 9V ~ 24V
2. Input resistance: NTC 100k thermal resistance (b value: 3950)
3. Output voltage: 0.00v-5.00v/0.00v-10.00v
4. Temperature measurement range: - 20 ～ + 150 (degree).
5. Output mode: S2 pad on the circuit board: open circuit (output 0.00v ~ 5.00V); short circuit (output 0.00v ~ 10.00v), the default is open circuit.
6. Application scope: remote data acquisition and control equipment;
7. Dimensions: (length) 26mm * (width) 23mm * (height) 10mm
8. Module interface:
24 V: positive port of power supply (9v-24v).
G: Power ground interface.
In: thermal resistance positive interface.
G: Negative electrode interface of thermal resistance.
Out: signal output interface (0.00v-5.00v/0.00v-10.00v).
G: Power ground interface.
Note: when the output voltage is 0.00v ~ 10.00v, the power supply voltage should be 15V.
Output (0.00v ～ 5.00V) resolution: 0.0294117v / ℃ (V / C)
Output (0.00v-10.00v) resolution: 0.0588235v / ℃ (V / C)
The formula for calculating the measured temperature is: (output voltage (V) / resolution) - 20 ℃ = measured temperature (℃).