Type-C 10m-6ghz 2W CNC attenuator step 0.5dB 0-31.5 CNC range

Description

Type-C 10m-6ghz 2W CNC attenuator step 0.5dB 0-31.5 CNC range
1、 Application scenario:
1. Receiver or amplifier, if signal gain adjustment
2. Cellular infrastructure
3. Microwave radio and VSAT
4. Test equipment and sensors
5. If and RF Design
2、 Index parameters
1. Power supply: type-C line;
2. Module frequency range: 10m-6ghz;
3. Attenuation range: 0-31.5db (refer to the measured curve for different frequencies);
4. Insertion loss: (refer to the measured curve for different frequencies);
5. Volume: 4.5 * 3 * 1.4cm (without prominent SMA),
Weight: 66g (including main machine +type-c line);
6. Current: < 80mA;
7、 P1dB=33dBm@1GHz （2W）；
8. Minimum step: 0.5dB;
9. Output interface: SMA bus head, input output impedance: 50 ohm
10. Delivery list: main machine with aluminum alloy shell *1+type-c line *1
11. Control mode: USB serial port, ch340 chip, communication baud rate: 9600bps;
(1) . send attenuation coefficient command: change attenuation coefficient
Format: att xx.x
(2) . response value signal:
Format: att OK
3、 Measured s parameter curve
3.1 S curve set to 0dB attenuation
3.2 S curve when set to 5dB attenuation
3.3 S-curve with 10dB attenuation
3.5 S-curve at 30dB attenuation
4、 Physical picture
4.1 mechanical outline drawing
4.2
实物图
4.3 SMA
接口图